Get Prepared for Your DES-6322 Exam With Actual EMC Study Guide!
Pass Your Next DES-6322 Certification Exam Easily & Hassle Free
EMC DES-6322 exam is suitable for those who have experience in VxRail implementation and want to enhance their skills and knowledge. DES-6322 exam is designed to test the candidate's ability to implement, configure, manage and troubleshoot VxRail solutions. DES-6322 exam is also suitable for those who want to validate their skills and knowledge in VxRail implementation and want to advance their career in this field.
EMC DES-6322 exam is intended for IT professionals who have experience with VxRail and want to demonstrate their expertise in implementing and deploying VxRail solutions. DES-6322 exam covers a range of topics, including VxRail hardware and software components, deployment best practices, and troubleshooting techniques. It is a comprehensive exam that tests your ability to work with VxRail in a variety of scenarios.
EMC DES-6322 exam covers a wide range of topics related to VxRail implementation engineering. This includes software installation, configuration, maintenance, and troubleshooting. Additionally, the exam covers topics such as network configuration, data protection, and performance tuning.
NEW QUESTION # 34
The VxRail Deployment Wizard is being used on a VxRail cluster with a customer-supplied VDS. Which settings must be used to ensure successful installation?
- A. Use the VxRail vCenter Server
Upload a configuration file (JSON) - B. Use the VxRail vCenter Server
Use the step-by-step method - C. Join an external vCenter Server
Upload a configuration file (JSON) - D. Join an external vCenter Server
Use the step-by-step method
Answer: A
Explanation:
NEW QUESTION # 35
An implementation engineer is tasked with setting up RecoverPoint for VMs on a new 4-node E Series VxRail duster How many VMs are licensed to be protected on the cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 36
A VxRail Cluster has just been deployed. Use the VxRail simulator to determine the Service Tag, Model, and ESXJ IP Address of the first node - vcluster730.esx01.edu.local.
Note: It is necessary to dose (x) the simulator window before you can select a response to this question.
- A. Option B
- B. Option D
- C. Option A
- D. Option C
Answer: B
NEW QUESTION # 37
A VxRail implementation engineer is validating the network environment with NVT. The proposed switch configuration is shown in the exhibit. The ToR Switch information file is available.
Use the VxRail simulator to set up NVT for switch validation. Import the switch Information and tag the ports based on the exhibit.
Answer:
Explanation:
Send your suggestions for this question.
NEW QUESTION # 38
Which service determines the primary node after powering on the VxRail nodes during the deployment of a VxRail cluster?
- A. Election
- B. Mystic
- C. Marvin
- D. Loudmouth
Answer: C
NEW QUESTION # 39
According to Dell best practices, which VxRail series can be deployed in either datacenters or remote locations?
- A. E Series
- B. D Series
- C. G Series
- D. V Series
Answer: A
NEW QUESTION # 40
What is a consideration when implementing a custom VDS on a VxRail cluster?
- A. Supports only four NIC uplinks
- B. Supported with external and internal vCenter Servers
- C. Used by multiple clusters managed by a single vCenter instance
- D. Supports only two NIC uplinks
Answer: B
NEW QUESTION # 41
A customer has decided that they will be using the Spanning Tree protocol in their Dell EMC ToR switches How should the switch ports used for VxRail be configured to achieve a successful deployment?
- A. Enable MLD snooping and querier
- B. Set the port mode to access
- C. Enable link aggregation for all ports
- D. Set the port type to edge
Answer: D
NEW QUESTION # 42
An implementation engineer is tasked with setting up RecoverPoint for VMs on a single G Series chassis. How many VMs are licensed to be protected on the cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 43
An implementation engineer places a VxRail node into maintenance mode using the Ensure accessibility setting What is the engineer likely planning to do?
- A. Permanent removal of host from cluster
- B. Temporary maintenance
- C. Extensive maintenance
- D. Shutdown of an entire cluster
Answer: C
NEW QUESTION # 44
How must node ports on Dell EMC ToR switches be configured when the Spanning Tree Protocol is enabled in an environment?
- A. As access ports
- B. In Forwarding status
- C. As edge ports
- D. In Port-Channel mode
Answer: C
NEW QUESTION # 45
Which VxRail Series is designed to support a VDI environment and requires a GPU card in each host?
- A. P Series
- B. G Series
- C. V Series
- D. S Series
Answer: D
NEW QUESTION # 46
From what environment must a network administrator run VxRail network validation?
- A. Top of Rack switches
- B. Same subnet as VxRail Management Network
- C. VxRail Deployment Wizard
- D. Windows PowerShell command prompt
Answer: A
NEW QUESTION # 47
What is the minimum number of VxRail nodes required for a vSAN storage policy with RAID-5 (Erasure Coding)?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 48
Which VxRail Series is designed to support a VDI environment and requires a GPU card in each host?
- A. P Series
- B. G Series
- C. V Series
- D. S Series
Answer: C
Explanation:
NEW QUESTION # 49
A systems engineer is performing a VxRail upgrade in a VMware Horizon VDI cluster All hosts are put in Maintenance Mode.
What action does the engineer need to perform on each host once the upgrade has been completed?
- A. From the Connection Server, run IcMaintcmd to take the hosts out of Maintenance Mode and reboot them
- B. From the Connection Server run IcMaintcmd to delete the parent VMs and exit Maintenance Mode for each host
- C. Set the InstantClone Maintenance annotation value to 2
- D. Set the InstantClone Maintenance annotation value to the original value
Answer: B
NEW QUESTION # 50
What is the correct CLI command to collect only the vCenter logs on VxRail Manager
- A. vc-support-bundle.sh -c
- B. vc-support.sh -v
- C. generateLogBundle.py -c
- D. generateFullBundle.py -v
Answer: C
NEW QUESTION # 51
A VxRail Test Plan has been completed What is the protocol for recording the results'?
- A. With the implementation team, complete each test and document the test date
- B. In front of a customer, complete and document each test, test date, and a screenshot of results
- C. With the implementation team, complete and document each test, test date, and a screenshot of results
- D. In front of a customer, complete each test and document the test date
Answer: B
NEW QUESTION # 52
After implementation, the implementation engineer observes errors from both VxRail Manager and vCenter Server. Dell EMC support has requested a log bundle containing only the required log files. Using the simulator, create and download a log bundle for Dell EMC support.
When you have finished, continue to the next question.
Answer:
Explanation:
Pending
Send your suggestions for this question.
NEW QUESTION # 53
What is the recommended format for host names when using the VxRail Deployment Wizard for an External vCenter solution?
- A. Host name for vCenter Server
FQDN for VxRail Manager - B. FQDN for both vCenter Server and for VxRail Manager
- C. FQDN for vCenter Server
Host name for VxRail Manager - D. Host name for both vCenter Server and for VxRail Manager
Answer: C
NEW QUESTION # 54
Which requirement must be met when expanding a 3-node VxRail G560F cluster with a fourth G Series node in the same chassis?
- A. PCIe network card must be added to all nodes
- B. Node requires only the same drive configuration
- C. Node hardware must be identical to the other three nodes
- D. New node must be at the same VxRail version as existing nodes
Answer: B
NEW QUESTION # 55
What is the recommended format for host names when using the VxRail Deployment Wizard for an External vCenter solution?
- A. FQDN for both vCenter Server and for VxRail Manager
- B. Host name for vCenter Server FQDN for VxRail Manager
- C. FQDN for vCenter Server Host name for VxRail Manager
- D. Host name for both vCenter Server and for VxRail Manager
Answer: C
NEW QUESTION # 56
......
Ace DES-6322 Certification with 106 Actual Questions: https://examcollection.prep4sureguide.com/DES-6322-prep4sure-exam-guide.html