Latest [Dec 11, 2021] NS0-183 Exam Questions – Valid NS0-183 Dumps Pdf
NS0-183 Practice Test Questions Answers Updated 61 Questions
NEW QUESTION 26
You are installing a new FAS2750 cluster with 24 HDDs for a customer to run a NAS workload. The customer requests that the HA pair have only a single aggregate that is located on Node 1. Maximum capacity is required.
Which action must be performed to ensure that the customer's requests are satisfied?
- A. Perform a takeover of Node 2 to ensure that it does not run.
- B. Assign all the data partitions from Node 2 to Node 1, and create a single aggregate.
- C. Assign all the partitioned disks from Node 2 to Node 1, and create a single aggregate.
- D. Assign all data LIFs to Node 1.
Answer: D
NEW QUESTION 27
What are two ways to identify an AFF All SAN Array system? (Choose two.)
- A. View the ONTAP System Manager system nodes.
- B. Use the san config show CLI command.
- C. Use the cluster image show CLI command.
- D. View the ONTAP System Manager cluster settings.
Answer: A,B
Explanation:
Ways to identify an ASA system You can identify an ASA system using ONTAP System Manager or using the ONTAP command line interface (CLI). From the ONTAP System Manager dashboard, you can click on the system nodes. The personality type is displayed as "ASA" for ASA systems. From the CLI, you can use san config show command. The ASA value returns as true for ASA systems
https://docs.netapp.com/us-en/ontap/task_asa_software_configuration.html#asa-host-settings-and-utilities
NEW QUESTION 28
Your customer wants to buy four new DS212C shelves with an 8 TB SATA drive. The customer also wants to know the usable aggregate size of this configuration.
In this scenario, which resource would you use to accomplish this task?
- A. Interoperability Matrix Tool (IMT)
- B. Config Advisor
- C. Fusion
- D. Hardware Universe (HWU)
Answer: C
NEW QUESTION 29
In an ONTAP switched cluster, which three types of traffic travels over the cluster network? (Choose three.)
- A. intercluster SnapMirror
- B. cluster database replication
- C. remote cluster peering
- D. Epsilon voting
- E. intracluster SnapMirror
Answer: B,D,E
NEW QUESTION 30
According to NetApp best practices, how many NTP servers should you associate with an ONTAP cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 31
You are creating an aggregate on a new FAS8200 with two DS224C shelves. Your customer wants to be able to use the Disk Maintenance Center.
In this scenario, what is the minimum number of spare disks required per node and disk type?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 32
You have just racked a new 6-node switched cluster with ONTAP 9.7. You need to configure the cluster switches.
In this scenario, which two elements would be used to complete the configuration? (Choose two.)
- A. serial port
- B. rlogin
- C. SSH
- D. SFP+ port
Answer: A,C
NEW QUESTION 33
After setting up a new cluster, you run an AutoSupport message for a test.
Which two commands would you use to proof the functionality and settings of AutoSupport? (Choose two.)
- A. system node autosupport history show
- B. system node autosupport option show
- C. system node autosupport show history
- D. system node autosupport show
Answer: A,D
NEW QUESTION 34
Click the Exhibit button.
A customer has a 2-node FAS8200 cluster with four DS212C shelves with 10 TB SATA drives.
Referring to the exhibit, an aggregate will be created with which default RAID type?
- A. RAID_DP
- B. RAID4
- C. RAID_TEC
- D. RAID1
Answer: C
NEW QUESTION 35
What is the maximum number of data disks that a RAID-TEC RAID group has?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 36
One of the nodes in your ONTAP 9.7 cluster has failed and is not coming back online.
Which two methods would you use to connect to the node failing to come back online? (Choose two.)
- A. Use Secure Shell.
- B. Use Telnet.
- C. Use the Intelligent Platform Management Interface.
- D. Use the Service Processor Interface.
Answer: A,D
NEW QUESTION 37
You want to create a new intercluster LIF for cross-cluster replication and use the CLI. After you create the nac101_intercluster_lif_icl LIF, you are not able to see the LIF in the list of local intercluster LIFs.
Referring to the exhibit, what is the problem?
- A. The LIF that was created has the wrong role type.
- B. The assigned port for the intercluster e1c LIF is in the down admin state.
- C. The home node of the new intercluster LIF has reached the maximum of four intercluster LIFs.
- D. The intercluster LIF has assigned an IP address that is not in the intercluster VLAN.
Answer: A
NEW QUESTION 38
You are planning the deployment of a new 8-node ONTAP 9.5 cluster. To prepare for the installation, you want to create a custom configuration worksheet with all the information that the customer provided. You also want to use the worksheet to generate CLI commands for your installation.
In this scenario, which NetApp tool will help you achieve your goal?
- A. ConfigBulider
- B. Config Advisor
- C. Config Validator
- D. Fusion
Answer: A
NEW QUESTION 39
You are preparing for the installation of a new 2-node cluster with ONTAP 9.7 using NL-SAS drives. Your customer wants to use the cluster exclusively with FlexGroups.
In this scenario, which two statements are correct? (Choose two.)
- A. All NL-SAS drives are divided evenly across both nodes.
- B. A NAS protocol is licensed on both nodes.
- C. A SAN protocol is licensed on both nodes.
- D. All NL-SAS drives are assigned only to one of the nodes.
Answer: A,B
NEW QUESTION 40
You have to disable a switch that is connected to a port on your FAS2750. You notice that the LIFs that are associated with this port are migrated to a port that is not expected.
In this scenario, what would cause this behavior?
- A. The network port is configured incorrectly.
- B. The network failover port is not licensed.
- C. There are no online ports within the same failover group.
- D. The broadcast domain is configured incorrectly.
Answer: D
NEW QUESTION 41
When planning the installation of a new ONTAP 9.5 cluster for a customer, which three steps should you perform? (Choose three.)
- A. Complete a Service Event Report.
- B. Open a support case to prepare for the installation.
- C. Search for Technical Support bulletins for the hardware.
- D. Review the hardware components in Hardware Universe.
- E. Use Config Builder to create a configuration spreadsheet.
Answer: A,D,E
NEW QUESTION 42
An ONTAP cluster is installed at a secure site. The array has no access to the Internet but is managed 24/7 by onsite engineers. The customer requires that when hardware failures occur, the failures are reported to the NetApp Support team as quickly as possible.
In this scenario, which two tasks should be performed during the project hand-off procedure to satisfy the customer's requirement? (Choose two.)
- A. Educate the onsite engineers about invoking the AutoSupport tool from ONTAP System Manager.
- B. Educate the onsite engineer about how to manually log support calls.
- C. Ensure that the onsite engineers receive EMS alerts when hardware issues occur.
- D. Ensure that Active IQ Config Advisor is installed.
Answer: A,C
NEW QUESTION 43
Before starting a base installation on an AFF A400, you need to find out the default cluster interconnect ports for the AFF A400 controllers.
In this scenario, which three resources would you use to find this information? (Choose three.)
- A. AFF FAS Documentation Center
- B. Active IQ Unified Manager
- C. Interoperability Matrix Tool (IMT)
- D. hardware installation setup poster
- E. Hardware Universe (HWU)
Answer: A,D,E
NEW QUESTION 44
Click the Exhibit button.
You are receiving AutoSupport e-mail from both controllers, but Active IQ is showing updates from only node cl-01-02.
Referring to the exhibit, what is a reason why Active IQ is receiving AutoSupport updates from only node cl-01-02?
- A. A firewall rule is blocking the AutoSupport.
- B. The cluster management LIF is down.
- C. The service processor is not configured.
- D. The mail host is blocking the AutoSupport.
Answer: A
NEW QUESTION 45
Click the Exhibit button.
After you install a FAS2720 with ONTAP 9.5, you disconnect the management port of node A to demonstrate cluster management LIF failover to the custom. When you reconnect the management port and try to revert the interface, you receive the following message.
Info: LIF "cluster_mgmt" has been hosted on port "NetApp-Cluster-01:e0M", whosehealth status is degraded.
You issue the network port showcommand and see the output shown in the exhibit. When you try to access the cluster interface, you cannot ping or connect to the cluster through the network.
Which two troubleshooting steps must you perform to solve the issue? (Choose two.)
- A. Reconnect the management cable to bring the port online.
- B. Set the Ignore Health Status parameter to true.
- C. Set the Ignore Health Status parameter to false.
- D. Use the network port modify -up-admin command to administratively down and up the port.
Answer: A,D
NEW QUESTION 46
......
NS0-183 dumps Sure Practice with 61 Questions: https://examcollection.prep4sureguide.com/NS0-183-prep4sure-exam-guide.html