Free 2026 1Z0-1066-26 Dumps 100 Pass Guarantee With Latest Demo
Prepare 1Z0-1066-26 Question Answers Free Update With 100% Exam Passing Guarantee [2026]
NEW QUESTION # 16
Which list of parameters is available for selection when you run the Start Backlog Planning scheduled process?
- A. Priority Rule. Organization. Demand Class, Item. Customer
- B. Demand Priority Rule. Organization. Demand Class. Item. Customer
- C. Demand Priority Rule. Organization. Category. Item, Customer
- D. Backlog Priority Rule. Organization. Category. Item. Customer
Answer: C
NEW QUESTION # 17
During an implementation, customer is in the process of planning supply requirements. Customer also needs to generate forecast and safety stock levels. Which plan type on the plan options should the customer be running?
- A. Demand and Supply Plan
- B. Supply Plan
- C. Safety Stock and Forecast Plan
- D. Integrated Plan
- E. Demand Plan
Answer: A
NEW QUESTION # 18
You have run a plan for your organization and there were sales orders that have been set up for drop shipment that you cannot see in the plan.
Which two options explain why the sales orders cannot be seen in the plan? (Choose two.)
- A. Drop Ship Demand Class has not be set up.
- B. Include drop ship demands and supplies flag has not been checked on your plan options.
- C. Drop Ship Item Validation Org has not been set up.
- D. Planning Profile 'Enable Planning for Drop Shipments' has not been set to 'Yes'.
- E. Supplier not configured in Manage Planning Source Systems
Answer: A,E
NEW QUESTION # 19
Which three statements are true about accounting?
- A. Cost method can be assigned at the item level.
- B. Receipt Accounting performs accrual accounting.
- C. Supply Chain Orchestration automatically selects the correct process based on user-defined subledger accounting rules when a supply creation is initiated.
- D. Landed Cost Management gives organizations visibility into their extended supply chain costs.
Answer: B,C,D
Explanation:
Landed Cost Management helps track additional costs associated with goods, enhancing visibility into total supply chain expenses. Supply Chain Orchestration uses predefined subledger accounting rules to automate process selection for new supply. Finally, Receipt Accounting handles accruals for received goods, impacting financials as soon as inventory is recorded
NEW QUESTION # 20
Which disaggregation methods are used for each of these measures: adjusted shipments forecast, target service level, and shipments forecast?
- A. Adjusted shipments forecast uses proportional, target service level uses same value, and shipments forecast uses measure.
- B. Adjusted shipments forecast uses measure, target service level uses same value, and shipments forecast doesn't have any disaggregation method.
- C. Adjusted shipments forecast uses measure, target service level uses same value, and shipments forecast uses self.
- D. Adjusted shipments forecast uses equal, target service level uses same value, and shipments forecast uses measure.
- E. Adjusted shipments forecast uses measure, target service level uses equal, and shipments forecast doesn't have any disaggregation method.
Answer: C
NEW QUESTION # 21
Your buyers are very attentive in maintaining the approved supplier lists as needed. One of your planners regularly uses the portal to communicate with some of their key suppliers and has noticed that the publication process is taking a lot longer to complete because the business has grown. The planner is also complaining that the collaboration candidates' list is cluttered with items that are not yet required.
Which two steps should you take to address the planner's complaint?
- A. Activate a profile option called "Publish Order Forecast Using Sourcing Rules".
- B. Activate a Supply Chain Collaboration setting to ignore zero forecast combinations.
- C. Activate the "Ignore for Supplier Collaboration" item attribute.
- D. Disable the decomposition and generate candidates' parameters in the Publish Order Forecast scheduled process.
Answer: A,D
Explanation:
To improve performance and reduce unnecessary items in the collaboration candidates list, you can activate settings to ignore zero forecast combinations, which prevents items with no forecast from appearing in the candidates list. Additionally, activating the "Ignore for Supplier Collaboration" attribute for specific items ensures that these are excluded from supplier collaboration processes, streamlining the list to relevant items only. These options help in managing supply collaboration settings efficiently and are verified in Oracle documentation on Supply Chain Collaboration and Publish Order Forecast processes
.
NEW QUESTION # 22
During a client implementation, it is determined that an external forecast will need to be imported into Planning Central for use as a Demand Schedule in a Supply Plan.
What three steps must be executed to enable the successful load of the External Forecast file? (Choose three.)
- A. CSV file must be generated.
- B. Collect Legacy Data Process must be run from Planning.
- C. Collect Planning Data Process must be run from Planning.
- D. Flat File must be zipped.
- E. Load Interface File for Import Process must be run.
Answer: A,B,E
NEW QUESTION # 23
Segmentation was last run many months ago and the replenishment planner is concerned about losing track of items whose policies get changed due to the upcoming resegmentation. There are also a lot of manually assigned segments that must be preserved. Which two approaches for Execute Segmentation should you use in this planner?
- A. Retain segment overrides should be selected.
- B. No other setting is needed.
- C. Auto-approve segmentation changes should not be selected.
- D. Save the last segmentation result should be selected.
Answer: A,D
Explanation:
To maintain manual overrides and track items through segmentation changes, select both "Save the last segmentation result" to archive the current segmentation configuration and "Retain segment overrides" to preserve manually assigned segments. These options prevent data loss during the resegmentation process
.
NEW QUESTION # 24
When running the Publish Order Forecast scheduled process, what is the minimum set of parameters needed to publish additional measures such as requisition and purchase order data?
- A. Include requisitions in the order forecast, "Include purchase orders in the order forecast", and "Publish order details"
- B. Include purchase orders in the order forecast
- C. Include requisitions in the order forecast, "Include purchase orders in the order forecast", and "Publish purchasing details"
- D. Publish order details
Answer: A
Explanation:
To include requisition and purchase order data in the forecast, you need to select parameters for both requisitions and purchase orders, along with the option to publish order details. This ensures that all relevant order data is communicated to suppliers through the forecast, as detailed in Oracle's guidelines for publishing order forecasts
.
NEW QUESTION # 25
Which statement order is NOT true about how to effectively address demand at risk?
- A. To maximize effort, use the Recommendations Summary graph and aim for a low number of recommendations with the associated at-risk demand value substantial enough to make a difference in demand fulfillment percentage.
- B. Recommendations appear in one of these five categories (or tabs): Expedite Buy Orders. Expedite Planned Orders. Expedite Transfer Orders. Add Resource Availability, and Add Supplier Capacity.
- C. Be aware that recommendations to expedite buy orders not only include purchase orders and requisitions, but also planned buy orders.
- D. When you accept an expedite recommendation, the order is firmed by using the expedite date as the firm date. So when the plan is run after accepting the recommendation, the planning process assumes the supply is available on the firm date.
Answer: B
NEW QUESTION # 26
Which two statements are true about Production Scheduling? (Choose two.)
- A. Schedule options include: Configure Scope. Parameters, and View Settings.
- B. Releasing a schedule can update Manufacturing Cloud work orders with revised dates, resources, release status, and work definitions.
- C. If a work order is not firm. Production Scheduling may schedule with an alternate resource.
- D. Refreshing a Production Schedule means that the schedule is being recalculated.
- E. A resource's constraint mode has two choices: Relaxed and Constrained.
Answer: A,C
NEW QUESTION # 27
Which is the proper fulfillment strategy to plan for supply using the appropriate lead times required for processing material at a third party, based on the manufacturing work definition?
- A. contract manufacturing
- B. expense destination transfers
- C. back-to-back orders
- D. outside processing operations
- E. drop shipments
Answer: D
NEW QUESTION # 28
Which three steps are required so that a supply plan can use different service-level percentages for different groupings of items when calculating safety stock?
- A. Create a safety stock policy assignment set.
- B. Assign the percentage on the Safety Stock tab of plan options.
- C. Create a supply planning policy assignment set.
- D. Create segment groups.
- E. Execute segmentation.
Answer: C,D,E
Explanation:
To apply different service-level percentages to item groupings, you first need to create a supply planning policy assignment set that defines the rules for various segments. Next, define segment groups to categorize items based on shared attributes. Finally, execute segmentation to assign items to the correct segments and apply the desired safety stock policies. This process ensures service-level percentages are customized per grouping as documented in Oracle's guidelines on safety stock policies and segmentation
.
NEW QUESTION # 29
What happens when a demand planner approves a demand plan and then adjusts shipment history and runs demand plan again?
- A. The approve action takes the data from the two final forecast measures and copies to Approved Final Shipments Forecast and Approved Final Bookings Forecast, respectively. Any subsequent demand plan run can change final shipments or bookings forecast values that will automatically update the approved forecast measures.
- B. The approve action makes the Adjusted Shipments Forecast and Adjusted Bookings Forecast measures "not editable." After a forecast is approved, the Final Shipments Forecast and Final Bookings Forecast measures remain unchanged until the forecast is approved again.
- C. The approve action makes the Adjusted Shipments Forecast and Adjusted Bookings Forecast measures "not editable." But any subsequent demand plan run can change Final Shipments Forecast and Final Bookings Forecast values.
- D. The approve action takes the data from the two final forecast measures and copies to Approved Final Shipments Forecast and Approved Final Bookings Forecast, respectively. After a forecast is approved, the approved values remain unchanged until the forecast is approved again.
Answer: D
NEW QUESTION # 30
Planner 1 works in Europe and needs to see three measures in kilograms (the default UOM). Planner 2 is US-based and needs to see those same three measures in pounds. Both planners need to use five tables in their plan analyses on a regular basis. At the moment, all five tables are displayed in kilograms.
Which two options would most efficiently address this requirement?
- A. Planner 2 opens a table, formats each measure to be displayed in pounds. When Planner 1 opens the same table, they reformat back to be displayed in kilograms.
- B. Open each table and format measures to duplicate the three measures and then format the duplicated measures to be displayed in pounds.
- C. Duplicate all five tables, then format the three measures in the copied tables to be displayed in pounds.
- D. There is no efficient solution to this requirement.
- E. Create duplicates of the three measures in Manage Planning Measures and change each new measure's UOM from kilograms to pounds, then duplicate the five tables but use the new measures.
Answer: B,E
Explanation:
The most efficient way to accommodate both planners' needs is to create duplicates of the required measures in pounds and then duplicate the tables to include the reformatted measures. This allows both planners to access tables in their preferred units without repetitive reformatting
MY ORACLE SUPPORT
.
NEW QUESTION # 31
You've decided to opt into the Customer Demand Collaboration feature. Which three statements describe what that enables?
- A. A customer can use B2B messaging to share their expected needs and historical consumption for the products you sell them.
- B. A customer can log in to a portal and manually enter their expected needs for the products you sell them.
- C. You can post to the portal your statistical forecast for the products you sell them so they can see your forecast for them.
- D. The information they share with you is informational and only available to you in the portal.
Answer: A,B,C
Explanation:
The Customer Demand Collaboration feature enables customers to share their demand forecasts via B2B messaging or manually through a portal. Additionally, you can share your forecast with them through the portal, facilitating mutual insight into supply chain needs and expectations, as detailed in Oracle's customer demand collaboration features documentation MY ORACLE SUPPORT
.
NEW QUESTION # 32
You ran a demand plan and you are reviewing the shipments forecast value measure. It is always zero for a particular item. Identify the root cause of this problem.
- A. In planning measures catalog, shipment forecast value measure is not enabled at item and organization level.
- B. In plan parameters, shipment forecast value measure expression is not defined.
- C. In plan parameters, Item List Price marked as primary does not have price defined for the particular item.
- D. In planning measures catalog, shipment forecast measure is not enabled at item and organization level.
Answer: A
NEW QUESTION # 33
Your customer has loaded shipment history of 1/1/14 through 12/31/16 and wants to generate a monthly forecast of 1/1/17 through 12/31/17 based on two-year shipment history.
When creating a demand plan, which two plan scopes and demand plan options should your customer use? (Choose two.)
- A. For demand plan option, add forecast shipments as forecasting profile, enter history start date as 1/1/15, enter history end date as 12/31/15, and enter forecast start date as 1/1/17.
- B. For demand plan option, add forecast shipments as forecasting profile, enter historical buckets as 24, and enter forecast buckets as 12.
- C. For demand plan option, add forecast shipments as forecasting profile, enter history start date as 1/1/15, forecast start date as 1/1/17, and enter forecast end date as 12/31/17.
- D. For plan scope, select plan horizon as 12 months, forecasting calendar as Gregorian, and forecasting time level as month.
- E. For plan scope, select plan horizon days as 365, forecasting calendar as Gregorian, and forecasting time level as month.
- F. For demand plan option, add forecast shipments as forecasting profile, and enter historical buckets as 24.
Answer: B,E
Explanation:
NEW QUESTION # 34
You are a demand planner and you want to generate forecast for all laptop and desktop products in the US business unit. You are using standard enterprise and product hierarchy. You have created a demand plan and now you must define plan scope.
Identify three valid steps. (Choose three.)
- A. For plan parameters, select forecasting calendar as Gregorian and time level as week.
- B. For plan parameters, select forecasting calendar as Gregorian and time level as month.
- C. For forecasting items, select hierarchy as product, level as product, and all laptop and desktop products as level members.
- D. For plan organizations, select hierarchy as enterprise, level as business unit, and US and level member.
- E. For plan organizations, select hierarchy as enterprise, level as country, and US as level member.
- F. For forecasting items, select hierarchy as product, level as category level 1, and laptop and desktop categories as level members.
Answer: A,E,F
Explanation:
NEW QUESTION # 35
A global company is subject to differing regulations regarding hazardous materials in a product. Version 1 of the product can be sold in North America and Europe. Version 2 of the product can only be sold in Europe.
Which sequence of setups could help a planner ensure that supply is available in a timely fashion per these constraints?
- A. Create an attribute-based netting rule using region and version; map the rule to collectible attributes; associate the rule to a supply plan; run the plan.
- B. Define segment groups based on region and version; execute segmentation; map the segmentation results to an attribute-based netting rule; associate the rule to a supply plan; run the plan.
- C. Define region and version as planning attributes; create an attribute-based netting rule using region and version; associate the rule to a supply plan; run the plan.
- D. Define region and version as planning attributes; map them to collectible attributes; create an attribute-based netting rule using region and version; associate the rule to a supply plan; run the plan.
Answer: B
NEW QUESTION # 36
As part of the agreement with one of your suppliers, you must always order product by the 100s. For example, if the required supply is 105, you must order 200, if it's 275, you must order 300. Which item attributes will help you achieve this?
- A. Fixed Order Quantity
- B. Minimum Order Quantity
- C. Rounding
- D. Fixed Lot Size Multiplier
- E. Maximum Order Quantity
Answer: D
NEW QUESTION # 37
The supply plan is not very reliable. Components often arrive early or late. A team of planners, buyers, marketers, product engineers, and materials managers are tasked to investigate. They list several possibilities that could explain their plan's poor results.
If you were a member of the investigation team, which step would you recommend to help troubleshoot this serious issue?
- A. For incomplete or unreliable demand schedules, use the Planning Advisor to identify forecast accuracy issues.
- B. For incorrect or incomplete bills of materials, use the Planning Advisor to identify bill of material anomalies.
- C. For incorrect or unreliable supplier lead times, use the Planning Advisor to determine lead time accuracy.
- D. For inaccurate quantity-on-hand issues, use the Planning Advisor to identify inventory accuracy improvement opportunities.
Answer: A
Explanation:
Supplier lead times directly impact the reliability of a supply plan. Using the Planning Advisor to assess lead time accuracy can help identify inconsistencies in expected delivery times, enabling the team to pinpoint and resolve these issues. This approach is supported by Oracle Planning and Collaboration Cloud guidelines for troubleshooting supply chain challenges MY ORACLE SUPPORT
.
NEW QUESTION # 38
What are two characteristics of an 'Item' organization? (Choose two.)
- A. It requires financial and accounting setups.
- B. It is ideal for deployments where inventory management may not be installed.
- C. It includes parameter definition, including lot. serial number, and item sourcing rules.
- D. It does not physically of financially track material storage or movement.
Answer: B,D
NEW QUESTION # 39
......
Dumps Real Oracle 1Z0-1066-26 Exam Questions [Updated 2026]: https://examcollection.prep4sureguide.com/1Z0-1066-26-prep4sure-exam-guide.html