350-601 Exam Dumps - PDF Questions and Testing Engine
350-601 Dumps - The Sure Way To Pass Exam
An In-depth Look at the Exam Domains
The Cisco 350-601 exam has a 120-minute duration. It is administered by Pearson VUE, are candidates should register for it on the company's website. The questions one will face relate to the following domains:
- Automation
Of all the test objectives, automation covers the least sub-topics. It assesses one's knowledge of automation and scripting tools as well as orchestration technologies. Here, you must have some background experience working with a ton of data center networking products such as Ansible, Puppet, POAP, PowerShell, DCNM, REST API, and EEM, among the rest.
- Security
Security as part of the Cisco data center technologies requires candidates to be skilled in the application of security for networks, computing solutions, and storage. Under this section, one also should demonstrate familiarity with the AAA and RBAC, keychain authentication, fabric binding, port security, and CoPP, among others.
- Network
Conversely, this domain will address the concepts such as the application of routing protocols, switching protocols like LACP, vPC, and RSTP+, and overlay protocols, including VXLAN EVPN and OTV. Furthermore, the questions under this module will confirm the applicant's understanding of packet flow and cloud service analysis, understanding of the updates for software and their effects, the implementation of the network configuration management, infrastructure monitoring, and the concepts of network assurance.
- Storage Network
This domain focuses on the 5 key skills, including the implementation of Fibre Channel, FCoE Unified Fabric (FIP and DCB), and NFS as well as NAS concepts. What's more, it will confirm if you understand the concepts of software updates and their effects and the implementation of infrastructure monitoring.
- Compute
This is another broad topic that emphasizes the skills in implementing Cisco Unified Compute System Blade Chassis, Cisco UCS Rack Servers, compute configuration management, and infrastructure monitoring, including Intersight and SPAN. Besides, it also addresses firmware and software updates and their effects on C-series and B-series servers, and mastery of the benefits of HyperFlex Infrastructure Concepts.
The Cisco 350-601 exam covers a wide range of topics, including data center infrastructure, network virtualization, storage networking, automation, and security. The exam consists of 90-110 multiple-choice and simulation questions that must be completed within a time limit of 120 minutes. The passing score for this exam is 825 out of 1000 points.
NEW QUESTION # 117
Which two configuration settings are available in the Cisco UCS Firmware Auto Sync Server policy? (Choose two.)
- A. No Action
- B. User Acknowledge
- C. Immediate Action
- D. Delayed Action
- E. User Notification
Answer: A,B
NEW QUESTION # 118
A network engineer must migrate a Cisco WSA virtual appliance from one physical host to another physical host by using VMware vMotion. What is a requirement for both physical hosts?
- A. The hosts must run different versions of Cisco AsyncOS.
- B. The hosts must use a different datastore than the virtual appliance
- C. The hosts must run Cisco AsyncOS 10.0 or greater.
- D. The hosts must have access to the same defined network.
Answer: D
NEW QUESTION # 119
An engineer is implementing security on the Cisco MDS 9000 switch. Drag drop the descriptions from the left onto the correct security features on the right.
Answer:
Explanation:
Reference:
san_switching/7x/b_5500_SAN_Switching_Config_7x_chapter_010010.html#con_1170967
NEW QUESTION # 120
Refer to the exhibit.
A flapping link issue has been reported on the vPC keepalive link. A packet capture has been activated on the Cisco Nexus switch. What is the destination IP address of the vPC keepalive packets that are sent by the switch?
- A. 239.255.70.83
- B. 192.168.254.2
- C. 192.168.254.4
- D. 192.168.254.1
Answer: C
NEW QUESTION # 121
Refer to the exhibit.
Which two statements describe the routing table of the leaf switch? (Choose two.)
- A. The next hop 10.0.1.14 for route 172.16.99.0/24 is the TEP address of a border leaf in ACI.
- B. The next hop 10.0.8.65 for route 10.20.1.0724 is the TEP address of a border leaf in ACI.
- C. 172.16.100.0/24 is a BD subnet in ACI.
- D. The next hop 10.1.168.95 for route 172.16.100 0/24 is the TEP address of a border leaf in ACI.
- E. 10.20.1.0/24 is a BD subnet in ACI.
Answer: A,E
NEW QUESTION # 122
Refer to the exhibit.
Which result of running the command is true?
- A. The PIM database is deleted.
- B. Multicast traffic forwarding is suspended.
- C. PIM join messages are suspended.
- D. MRIB is flushed
Answer: A
Explanation:
Explanation
When you restart PIM, the following tasks are performed: The PIM database is deleted. The MRIB and MFIB are unaffected and forwarding of traffic continues. The multicast route ownership is verified through the MRIB. Periodic PIM join and prune messages from neighbors are used to repopulate the database.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/multicast/configuration/guide/b_C
NEW QUESTION # 123
Drag and drop the storage technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
Explanation
Application Description automatically generated
The release of NFSv4 brought a revolution to authentication and security to NFS exports. NFSv4 mandates the implementation of the RPCSEC_GSS kernel module, the Kerberos version 5 GSS-API mechanism, SPKM-3, and LIPKEY. With NFSv4, the mandatory security mechanisms are oriented towards authenticating individual users, and not client machines as used in NFSv2 and NFSv3.
https://web.mit.edu/rhel-doc/5/RHEL-5-manual/Deployment_Guide-en-US/s1-nfs-security.html
NEW QUESTION # 124
What are two requirements when planning a Cisco HyperFlex All Flash standard cluster installation using three HX240c M5 servers? (Choose Two)
- A. If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames must also be enabled on the upstream switches.
- B. The servers must be discovered, unassociated, and connected to each fabric interconnect.
- C. The hypervisors must be installed to Cisco FlexFlash SD cards.
- D. The cluster deployment type must support a mix of HDD and SSD.
- E. If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames do not have to be enabled on the upstream switches.
Answer: A,B
Explanation:
https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/ AdminGuide/3_5/ b_HyperFlexSystems_AdministrationGuide_3_5/b_HyperFlexSystems_AdministrationGuide_3_5_chapter_01111.html
NEW QUESTION # 125
A host EPG Client wants to talk to a webserver in EGP Web. A contract with default settings is defined between EPG Client and EPG Web, which allows TCP communication initiated by the client toward the webserver with TCP destination port 80. Which statement is true?
- A. If EPG Web is made a preferred group member, a contract between EPG Client and EPG Web is no longer required for the host in EPG Client to reach the webserver in EPG Web.
- B. If vzAny is configured to consume and provide a "deny all" contract, traffic between EPG Client and EPG Web is no longer allowed.
- C. The host in EPG Client is allowed to connect to TCP destination port 80 on the webserver in EPG Web.
The webserver is allowed to initiate a separate TCP connection to a host port with TCP source port 80. - D. The host in EPG Client is allowed to connect to TCP destination port 80 on the webserver in EPG Web.
The webserver will not be allowed to initiate a separate TCP connection to a host port with TCP source port 80.
Answer: C
Explanation:
Apply Both Direction and Reverse Filter Port in the subject for the filter. These two options are by default enabled...This means that if the provider EPG initiates traffic toward the consumer EPG, the Cisco ACI fabric allows it for any destination ports if the source port is 80.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/ b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_01000.html Reverse filter and apply in both directions is default.
If a filter allows traffic from any consumer port to a provider port (e.g. 8888), if reverse port filtering is enabled and the contract is applied both directions (say for TCP traffic), either the consumer or the provider can initiate communication. The provider could open up a TCP socket to the consumer using port 8888, whether the provider or consumer sent traffic first.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/ b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_01000.html
NEW QUESTION # 126
Refer to the exhibit.
Which backup operation type does not include the Preserve Identities feature?
- A. full state
- B. system configuration
- C. logical configuration
- D. all configuration
Answer: A
NEW QUESTION # 127
Refer to the exhibit.
Refer to the exhibit. Which configuration ensure that the cisco Nexus 7000 series switches are the primary devices for LACP?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option A
- D. Option B
Answer: A
NEW QUESTION # 128
An engineer must configure OSPF in the data center. The external routes have already been redistributed OSPF. The network must meet these criteria:
* The data centre servers must reach services in the cloud and the services behind the redistributed routes.
* The exit point toward the internet should be propagated only when there is a dynamically learned default route from the upstream router.
Which feature is required?
- A. Default-information originate
- B. Totally stubby area
- C. Default-information originate always
- D. Stubby area
Answer: A
Explanation:
Explanation
https://learningnetwork.cisco.com/s/question/0D53i00000Kt544/defaultinformationoriginate-always
NEW QUESTION # 129
Where is the witness deployed in a two-node Cisco HyperFlex Edge deployment?
- A. to a third-party cloud provider
- B. to Cisco Intersight
- C. to the HyperFlex Edge two-node cluster
- D. to an additional server with network access to HyperFlex Edge
Answer: C
Explanation:
Explanation
NEW QUESTION # 130
A Cisco UCS C-Series server is installed at a data center. The server should be managed by the Cisco UCS Manager by using a single cable for management and data traffic. Which configuration should be applied after the Physical connection is established?
- A. Option C
- B. Option D
- C. Option A
- D. Option B
Answer: D
NEW QUESTION # 131
An engineer is configuring a vHBA template in Cisco UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAU Traffic flows. Which two resources must be specified in the vHBA template? (Choose two)
- A. MAC addresses
- B. VLAN ID
- C. WWIN
- D. WWVPN Pool
- E. Fabric ID
Answer: C,D
NEW QUESTION # 132
......
Quick Facts: Cisco 350-601 Exam
Test 350-601 has a 120-minute duration and costs $400. It brings a total of 90-110 items relating to data center design and other similar topics. Usually, candidates can register and take their exam through Pearson VUE, which is the official exam testing partner of Cisco.
Pass Cisco 350-601 Exam Quickly With Prep4sureGuide: https://examcollection.prep4sureguide.com/350-601-prep4sure-exam-guide.html